ProLash - Paris

Step 1 — Prep Your Natural Lashes

Ensure lashes are clean, dry and free from oils or makeup for the best hold.

Step 2 — Apply The Bond

Using the bond side, lightly brush a small amount onto your natural lashes where the lash clusters will sit.
Wait around 20–30 seconds until slightly tacky.

Step 3 — Apply Lash Clusters

Using tweezers or a lash applicator, place the lash clusters underneath or along your natural lash line.
Gently press into place.

Step 4 — Seal The Lashes

Apply a light coat of the seal side to remove any sticky residue and lock your lashes in place for a longer-lasting finish.

Step 5 — Final Touch

Gently squeeze lashes together with your applicator for a seamless salon-style look.

Pro Tips ✨

• Avoid getting lashes wet for the first few hours after application.
• Do not overapply bond — a thin layer works best.
• Store product upright with lids tightly closed.
• Remove gently with an oil-based remover.

Step 1 — Apply Lash Remover

Using your remover, gently brush onto the lash bond area and along the lash line.
Allow it to sit for 30–60 seconds to break down the adhesive.

Step 2 — Gently Remove Lashes

Carefully slide the lash clusters away from your natural lashes using tweezers or fingertips.
Do not pull or tug.

Step 3 — Clean Natural Lashes

Use a cotton pad or cleansing brush to remove any remaining bond or seal residue.

Step 4 — Rinse & Care

Cleanse the eye area gently and allow lashes to dry naturally.

Important ✨

• Never force lashes off.
• Avoid pulling to protect your natural lashes.
• For reusable lashes, gently clean clusters after removal before storing.

No returns due to hygiene reasons unless faulty

View our returns policy

www.flamingobaytanning.co.uk/returns-refunds-lashes

We dispatch within 1–2 working days via Evri 48 tracked delivery.

View our returns policy

www.flamingobaytanning.co.uk/returns-refunds-lashes
 

We dispatch within 1–2 working days via Evri 48 tracked delivery.

View our returns policy

www.flamingobaytanning.co.uk/returns-refunds-lashes

Keep your 7 Days ProLash DIY Cluster Lashes looking fresh, fluffy, and reusable with these simple care tips:

Before Application

• Start with clean, dry lashes free from oils or makeup.

• Avoid applying heavy skincare or mascara before use.

Daily Care

• Avoid rubbing or pulling on your lashes.

• Keep lashes away from excessive steam, oils, and water for the best hold.

• Sleep carefully to prevent crushing or bending the clusters.

Cleaning Your Lashes

• Gently remove leftover glue using tweezers or fingers.

• Clean clusters softly with a cotton swab and oil-free cleanser if needed.

• Do not soak lashes in water.

Removal Tips

• Use a lash remover or oil-based cleanser to loosen the adhesive.

• Remove clusters gently from the outer corner inward.

• Never force or pull the lashes off.

Storage

• Place lashes back into the original tray after use.

• Store in a cool, dry place away from direct sunlight.

Reuse

With proper care, your DIY cluster lashes can be reused multiple times while maintaining their soft, voluminous look.